Subpart A: General
- §195.0 Scope
- §195.1 Which pipelines are covered by this Part?
- §195.2 Definitions
- §195.3 What documents are incorporated by reference partly or wholly in this part?
- §195.4 Compatibility necessary for transportation of hazardous liquids or carbon dioxide
- §195.5 Conversion to service subject to this part
- §195.6 Unusually Sensitive Areas (USAs)
- §195.8 Transportation of hazardous liquid or carbon dioxide in pipelines constructed with other than steel pipe
- §195.9 Outer continental shelf pipelines
- §195.10 Responsibility of operator for compliance with this part
- §195.11 What is a regulated rural gathering line and what requirements apply?
- §195.12 What requirements apply to low-stress pipelines in rural areas?
- §195.13 What requirements apply to pipelines transporting hazardous liquids by gravity?
- §195.15 What requirements apply to reporting-regulated-only gathering lines?
- §195.18 How to notify PHMSA
Subpart B: Annual, Accident, and Safety-Related Condition Reporting
- §195.48 Scope
- §195.49 Annual report
- §195.50 Reporting accidents
- §195.52 Immediate notice of certain accidents
- §195.54 Accident reports
- §195.55 Reporting safety-related conditions
- §195.56 Filing safety-related condition reports
- §195.58 Report submission requirements
- §195.59 Abandonment or deactivation of facilities
- §195.60 Operator assistance in investigation
- §195.61 National Pipeline Mapping System
- §195.63 OMB control number assigned to information collection
- §195.64 National Registry of Operators
- §195.65 Safety data sheets
Subpart C: Design Requirements
- §195.100 Scope
- §195.101 Qualifying metallic components other than pipe
- §195.102 Design temperature
- §195.104 Variations in pressure
- §195.106 Internal design pressure
- §195.108 External pressure
- §195.110 External loads
- §195.111 Fracture propagation
- §195.112 New pipe
- §195.114 Used pipe
- §195.116 Valves
- §195.118 Fittings
- §195.120 Passage of internal inspection devices
- §195.122 Fabricated branch connections
- §195.124 Closures
- §195.126 Flange connection
- §195.128 Station piping
- §195.130 Fabricated assemblies
- §195.132 Design and construction of aboveground breakout tanks
- §195.134 Leak detection
Subpart D: Construction
- §195.200 Scope
- §195.202 Compliance with specifications or standards
- §195.204 Inspection—general
- §195.205 Repair, alteration and reconstruction of aboveground breakout tanks that have been in service
- §195.206 Material inspection
- §195.207 Transportation of pipe
- §195.208 Welding of supports and braces
- §195.210 Pipeline location
- §195.212 Bending of pipe
- §195.214 Welding procedures
- §195.216 Welding: Miter joints
- §195.222 Welders and welding operators: Qualification of welders and welding operators
- §195.224 Welding: Weather
- §195.226 Welding: Arc burns
- §195.228 Welds and welding inspection: Standards of acceptability
- §195.230 Welds: Repair or removal of defects
- §195.234 Welds: Nondestructive testing
- §195.246 Installation of pipe in a ditch
- §195.248 Cover over buried pipeline
- §195.250 Clearance between pipe and underground structures
- §195.252 Backfilling
- §195.254 Above ground components
- §195.256 Crossing of railroads and highways
- §195.258 Valves: General
- §195.260 Valves: Location
- §195.262 Pumping equipment
- §195.264 Impoundment, protection against entry, normal/emergency venting or pressure/vacuum relief for aboveground breakout tanks
- §195.266 Construction records
- §195.236-195.244 [Reserved]
Subpart E: Pressure Testing
- §195.300 Scope
- §195.302 General requirements
- §195.303 Risk-based alternative to pressure testing older hazardous liquid and carbon dioxide pipelines
- §195.304 Test pressure
- §195.305 Testing of components
- §195.306 Test medium
- §195.307 Pressure testing aboveground breakout tanks
- §195.308 Testing of tie-ins
- §195.310 Records
Subpart F: Operation and Maintenance
- §195.400 Scope
- §195.401 General requirements
- §195.402 Procedural manual for operations, maintenance, and emergencies
- §195.403 Emergency response training
- §195.404 Maps and records
- §195.405 Protection against ignitions and safe access/egress involving floating roofs
- §195.406 Maximum operating pressure
- §195.408 Communications
- §195.410 Line markers
- §195.412 Inspection of rights-of-way and crossings under navigable waters
- §195.413 Underwater inspection and reburial of pipelines in the Gulf of America and its inlets
- §195.414 Inspections of pipelines in areas affected by extreme weather and natural disasters
- §195.415 [Reserved]
- §195.416 Pipeline assessments
- §195.417 Notification of potential rupture
- §195.418 Valves: Onshore valve shut-off for rupture mitigation
- §195.419 Valve capabilities
- §195.420 Valve maintenance
- §195.422 Pipeline repairs
- §195.424 Pipe movement
- §195.426 Scraper and sphere facilities
- §195.428 Overpressure safety devices and overfill protection systems
- §195.430 Firefighting equipment
- §195.432 Inspection of in-service breakout tanks
- §195.434 Signs
- §195.436 Security of facilities
- §195.438 Smoking or open flames
- §195.440 Public awareness
- §195.442 Damage prevention program
- §195.444 Leak detection
- §195.446 Control room management
- §195.450 Definitions
- §195.452 Pipeline integrity management in high consequence areas
- §195.454 Integrity assessments for certain underwater hazardous liquid pipeline facilities located in high consequence areas
Subpart G: Qualification of Pipeline Personnel
Subpart H: Corrosion Control
- §195.551 What do the regulations in this subpart cover?
- §195.553 What special definitions apply to this subpart?
- §195.555 What are the qualifications for supervisors?
- §195.557 Which pipelines must have coating for external corrosion control?
- §195.559 What coating material may I use for external corrosion control?
- §195.561 When must I inspect pipe coating used for external corrosion control?
- §195.563 Which pipelines must have cathodic protection?
- §195.565 How do I install cathodic protection on breakout tanks?
- §195.567 Which pipelines must have test leads and what must I do to install and maintain the leads?
- §195.569 Do I have to examine exposed portions of buried pipelines?
- §195.571 What criteria must I use to determine the adequacy of cathodic protection?
- §195.573 What must I do to monitor external corrosion control?
- §195.575 Which facilities must I electrically isolate and what inspections, tests, and safeguards are required?
- §195.577 What must I do to alleviate interference currents?
- §195.579 What must I do to mitigate internal corrosion?
- §195.581 Which pipelines must I protect against atmospheric corrosion and what coating material may I use?
- §195.583 What must I do to monitor atmospheric corrosion control?
- §195.585 What must I do to correct corroded pipe?
- §195.587 What methods are available to determine the strength of corroded pipe?
- §195.588 What standards apply to direct assessment?
- §195.589 What corrosion control information do I have to maintain?
- §195.591 In-Line inspection of pipelines
Appendices and other sections
- Appendix A to Part 195 Delineation Between Federal and State Jurisdiction—Statement of Agency Policy and Interpretation
- Appendix B to Part 195 Risk-Based Alternative to Pressure Testing Older Hazardous Liquid and Carbon Dioxide Pipelines
- Appendix C to Part 195 Guidance for Implementation of an Integrity Management Program
Compiled from the Electronic Code of Federal Regulations (eCFR), an editorial compilation and not an official legal edition of the CFR. The official text is the Federal Register and the annual CFR edition.